Vhs Rca

How to Convert Your Camcorder to DVD

One of the easiest ways to convert your camcorder to DVD is to hook up the camcorder to a recording device such as a DVR with a DVD Burner. For this example I'll be using a Sony Hi8 camcorder. To do this yourself, follow these steps.

1. Locate your camcorder and make sure you have the RCA (red, white, yellow) cables and the power cord.
2. Insert the tape you'd like to convert into the camcorder, and make sure it's rewound. Plug the RCA cables into the video out jack on the camera, also make sure the power supply is connected, and plugged into the wall.
3. Insert the cables into the INPUT of the DVR or recording device. (make note of what input your used, as often DVRs have multiple inputs. This is normally clearly labeled just above or below the jacks as input 1, 2 or 3.)
4. Power on the DVR and ensure you set it on the same input as the step previous.
5. Test out the picture and sound by pressing play on the camcorder and making sure everything is fine on the monitor.
6. Rewind the tape back to the beginning, and then press play. Immediately after pressing play, hit record on the DVR and now your video will be recorded to the DVR's hard drive.
7. From here, if your DVR supports burning video to DVDs you can burn your discs straight from the interface menu.

If you wanted a more advanced capture that would allow you the ability to edit or manipulate your footage, you'll want to transfer it over to your computer first. To accomplish this, there are a variety of different methods you could try. For best results, you'll want to get your hands on a video capture card or device that allows you to capture directly to your computer's hard drive. For a guide on how to do this check out my guide on how to capture video using a Canopus capture unit.

Feel free to comment for any help/tips. Good luck!

About the Author

Chris Papciak has been working with computers and media for over 15 years. He has extensive knowledge in the field of media transfers, more specifically video tapes. He currently works as as a video transfer technician at a Southern California based company called DVD Your Memories, which specializes in converting old media formats to digital such as Film to DVD San Diego and VHS to DVD San Diego.

Code Cost-free Movie VCR Partner NTSC Combination

A code free DVD VCR Combo is a three-in-one device and combines DVD, VCR, and MP3 player in one, saving both time and space. You will not have to plug on different gadgets for different purposes like viewing a movie, listening to a music etc. The added advantage is that the combo costs less than the combined prices of all the gadgets taken together. Moreover, there is no standard specification barrier here. With a code free DVD VCR combo you can play video tapes, DVDs and CDs procured from anywhere in the world. It means even if you are using NTSC as your standard, which is a normal practice in the United States, you can play DVDs using PAL or SECAM as their standards. This would not have been possible in your earlier gadgets of DVD players or VCRs.

The system has many new features, not featured in ordinary TVs, DVD players or VCRs available in the market. Some of the main features are:

o It can play any DVD, VCD, Audio CD, and VHS tapes.

o Multitasking is possible since you can watch a DVD while recording a TV program on the VCR.

o Automatic clock set up and channel surfing capabilities.

o Buttons for different modes are easy to handle.

o Remote controlled DVD and VCR decks.

o Composite S-Video and output programs for optimization of connectivity and performance.

o If DVD is not copy protected with Macro-vision, it can record DVD to VHS.

o Provides for child lock.

o Advantage of having RF inputs and outputs so that it can connect with all types of new and old TVs.

Apart from these general features of the Combo, the device has certain special features relating to DVD and VCR too.
.
Followings are the features that make the combo all-DVD compatible:

o A 10-bit video digital-analog converter that transforms digital signals to analog signal and vice versa facilitating transmission.

o A 96 KHz with 24-bit source play back system.

o A 27 MHZ advanced digital filter.

o It plays back MP3 files from the CD-ROM.

o During 2x speed playback operation the audio continues without being disturbed.

o Allows DTS enhanced DVDs to be played since it has DTS digital output system installed.

For VCR compatibility, the system provides the following features:

o A Hi-Fi stereo system for maintaining high sound qualities.

o It can playback S-VHS systems better than any other standard resolution.

o Provides for VISS, a VHS Index Search System.

o Provides for Scanning.

o Has a feature for Zero return.

o Allows direct time search and blank search.

o It has four heads for superior slow motion or stop action viewing.

o Consists of 16-event, with one year timer recording.

o Consists of both a time remaining and a real time counter.

Since it is a combo, it normally comes in form of a package. The package contains not only the components but other necessary articles like the warranty and Registration card, user guide, and at times information about other bonus offers. The components in the package includes the DVD-VCR combo, RCA cable for the audio and video connections, Radio Frequency Antenna Cable, a remote control operator, and 1.5V "AA" batteries.

The final part of the set up is purely technical yet no wonders for even a layman. What you have to do is that when all the wires and cables are duly attached to the device, just turn on the device and the in built auto set up will guide you through the rest of the process. However, a few things may not be overlooked as follows:

• In the pop up dialog boxes which will guide you through the process of set up, read the instructions and the information carefully, so that you don't put yourself in setting up things you don't really want.
• Allow the set up at each stage adequate time to complete its operation.
• It will be better if you keep some extra power generation unit available at hand like a small generator or inverter so that in case of sudden power failure, your set up process is not rudely interrupted. An untimely interruption may result in a faulty set up and problems in future.
• You can refer to the user manual whenever some doubt arises in your mind. The set up process has also a simultaneous in built help process to which you can refer.
• As it is a combo, it normally comes in kind of a package. The package contains but not only the constituents but other necessary articles like the warranty and Registration card, user guide, as well as times specifics of other bonus offers. The constituents inside package includes the DVD-VCR combo, RCA cable to the video and audio connections, Rf Antenna Cable, a remote control operator, and 1.5V "AA" batteries.

  The last the main put in place is purely technical yet no wonders for only a layman. Everything you must do is the fact when many of the wires and cables are duly coupled to the device, just start it along with the in built auto set up will help you with the rest of the process. However, several things is probably not overlooked the following:
  # Inside pop-up dialog boxes which will show you how throughout the procedure for put in place, look at instructions as well as the information carefully, so you don't place yourself in starting items don't totally desire.

  # Encourage the build each and every stage adequate time for them to complete its operation.

  # It will be better in case you keep additional power generation unit offered at hand being a small generator or inverter so in case there is sudden power failure, your setup process isn't rudely interrupted. An untimely interruption may create a faulty put in place and problems later on.

  # You possibly can consider the person manual whenever some doubt arises in your thoughts. The build process has also a simultaneous in built help process that you possibly can refer.

  Once all things are set up and hang up up is complete, you are ready for making use of your device and watch the show. Together with your remote you possibly can pause, play at 1/8th on track speed, and you could also zoom the wonderful pictures to 4X size for fine viewing. The playback includes the A-B repeat that permits someone to replay the widely used segment of this DVD or CD. There is also a Bookmark feature enabling that you revisit a unique vintage point you wish most or perhaps you can begin to play the chapters arbitrarily. The 'One Touch Recording' feature while in the device makes copying the perfect job. However, this feature are not to be controlled while using remote. The feature allows you to record a DVD to a VHS tape. The record speed ranges from Super Slow (SP) to Super Long Play (SLP). Simply by pushing the copy button, it is all done. The VCR props up S-VHS recording and playback. While ordinary VCR can playback and record only 250 lines of resolution, this combo supports 400 lines of resolution, setting up a dissimilarity from the picture. You can even audio-dub a pre-recorded videocassette from CD, DVD, a microphone, a stereo audio or maybe a tape deck. However, it can't record in stereo. Moreover, the searching features like Index Marks, Blank Search, and Direct time search makes searching anything possible.

  No device is without its limitations. The newest combo does have it's limitations too. You need to go manual while recording a DVD into a VHS tape. You cannot find any facility for stereo recording in S-VHS recording. The operations on MP3 play back are also limited mainly because it cannot look at ID3 tags for the MP3, that permits information such as title, artist, album, track number, and other specifics of the file to get trapped in the file itself. While displaying the list of recorded songs, it only displays 4 to 8 characters and for that reason cannot display the whole title. To ensure the track also can't be seen if you can't utilize OSD for the TV that is to be a somewhat unnecessary utilization of electricity and use of TV when you find yourself following music only.

I need info on how to record audio after recording on a RCA VHS Camcorder with the A/V features on camcorder.?

It can't be done except on very special, rare camcorders.
If you don't have a button that says "Audio Dub", you can't do it.
If you have the one, 1988 vintage RCA VHS camcorder that had this feature, this is how it's done.
1- Patch you audio source into the "Audio IN" jack on the camcorder.
2- Establish where the new audio is going to start and end.
3- Forward the tape to where the dubbed scene is going to END.
4- Reset the counter to zero.
5- Rewind the tape to the beginning of the dubbed scene.
6- Press the Play" button and the "Pause" button.
7- Press the "Audio Dub" button.
8- Start your new audio source and press the "Pause" button again to start the recording.
The counter will begin counting down backwards.
9- When the counter hits zero, the camcorder will stop automatically.
This will add a mono sound track to your video and will also retain the original sound.

If you don't have an "Audio Dub" button, attempting to record new audio will produce a tape with new audio only. Your existing audio and picture will be gone forever.

Ninja III: The Domination Trailer (VHS, RCA/Columbia Pictures/Hoyts video)